copper welding wire

Mainly composed of raw material: copper, zinc and tin 

 Capability and merit: can eliminate stoma, melting point low, welding technology well, welding seam shaping well, mechanical height, resist cracking well performance

 Application scope: be suitable oxyacetylene gas welding brass, brazing copper, copper-nickel alloy, gray iron steel and mosaic hard alloy tool, be suitable GTAW, and oxyacetylene gas welding copper etc

Packing : 10kg/pic  or 25kg/pic(in side 5pic*5bag)   outside packing:50kg~500kg/wood box

,We can according the customer requirement change packing

 Use valid: long-term use.

Welding wire chemistry content (%)

attention:

1.After welding must put in order interface and welding wire surface, must welding torch preheat  400-500 welding

2.Welding must use cooperation copper gas weld flux

3.Welding flame must use neutral or light oxide fame ,suitable reduce welding temperature,raise welding speed, reduce flux stop time in high temperature in order to reduce zinc evaporate and oxide.