Pvc DOUBLE SIDE TAPE

Pvc double side Tape, will bond to most surfaces including many plastics, composites, sealed woods and metals; is recommended when bonding to surface material such as Polyethylene, Polypropylene. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces, before it reaches it maximum adhesion, is 1 to 24 hours.